![]() ![]() You're also trying to use the built-in usb port of the cutter, which in itself is enough info to start solving your problems.įirst off, do not use the built-in usb port of the cutter. We can guess you're running some version of windows since you mention 'device manager'. And everything works great But strangely every now and then when the cutter and laptop have been rebooted / restarted under device manager it states the device is no longer working and it has a mark next to it By messing around and changing USB port and plugging the USB cable in and out while the cutter is on sometimes solves the problem and the cutter gets recognised as it should and it gets assigned a com port as it should So it's working sort of but just very very annoying Anyone know why this happens and is there a way to stop it? Thanks in advance for any help. Installed the USB driver and got it working with signcut. I understand the cutter has a serial to USB conversion and I did everything fi should. 4 copies.Hey guys I have a creation ct-630 USB version. You can still cut multiple designs at once if you set it up in your cut/plot settings e.g. To cut a different design I found I could only have one design on the SD card at a time, so remove any designs and only put on the design you are cutting at the time. To cut the same design again I have to power off the cutter and go through all steps again. Press "Enter" again your cut should start.Press "Enter" button you should see your file with some other info.Press "Func" button you should see "Execute File?".Press "Online" button on cutter to turn offline.Put card into cutter while off then power on.In General tab goto send mode drop down and select "Save to file".Goto File > Cut/Plot or click Cut/Plot icon or Ctrl+L.I'm using FlexiSTARTER P-Cut edition v10.5 ![]() After posting the above, the problem kept happeningĪfter another support email I found out the only way to get this to work without the cut line was to save the design to an SD card then cut directly from there, a pain but it finally worked. ![]()
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |